Hitachi VT-MX431A Manual

A SERVICE OF

next previous

pg. 15 CLOCK SET UP

32

Press the PLAY/

or STOP/ button to point to "AM" or "PM"

(Example: PM)

8 Start the clock

Press the RESET/EXIT or F.FWD/ button.

Although seconds are not displayed, they begin counting from 00 when you press the

RESET/EXIT or F.FWD/

button. Use this feature to synchronize the clock with the correct

time.

· When unplugging the AC-cord or if there is a power failure for more than 30 seconds, you

may have to reset the clock.

· If the display shows an abnormal reading or no reading, unplug the power cord for more than

30 seconds. Then plug it back in. And reset clock.

TO CHANGE CLOCK SETTING

1 ) Press the MENU button until the INITIALIZE menu appears.

2) Press the PLAY/ or STOP/ button to point to "SETTING CLOCK". Then, press the

F.FWD/ button.

3) Follow steps [2] to [8].