Filter
Top Products
Use this feature to memorize the beginning point that you want to return to. And you can
search it easily by rewinding or fast forwarding.
• Use the remote control for this procedure.
• The "PWR." and the "VCR" indicator must appear on the VCR's digital display.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of
the VCR to match the channel selected on the TV.
• This feature only works with a prerecorded tape.
1 Stop tape at your desired point
Insert a prerecorded tape. Rewind or fast forward the tape to the beginning point at which you
want to mark.
2 Reset the counter to 0:00:00
Press the COUNTER RESET button on the remote control. If necessary press the COUNTER
RESET button again to reset the counter to 0:00:00.
3 Select the Counter Memory mode
Press the COUNTER MEMORY button on the remote control until "M" appears on the TV
screen.
• The COUNTER MEMORY button does not function if the Auto Repeat mode is set to [ON]. In
this case, set the Auto Repeat mode to [OFF].
4 Begin recording or playback
Press the REC or PLAY button.
Press the STOP button when recording or playback is completed.
5 To activate the Counter Memory
Press the nEW (or F.FWD) button, the VCR will stop automatically when the counter has
returned to approximately 0:00:00.
I NOTE: The displayed time will not change during blank portions on the tape. ]
TO EXIT THE COUNTER MEMORY
Press the COUNTER MEMORY button on the remote control so that "M" disappears from the
TV screen.
On more information concerning the on screen display, please refer to page 28.
43