: pg. 15 CLOCK SET UP
Set the clock accurately for proper automatic timer recording• We suggest that you use a TV or
radio station as your time source•
In the example below, the clock is to be set to:
DATE March 1st, 1998
SETTING TIME 5:40PM
• Use the remote control for this procedure•
• When in the Menu mode the following buttons only work (PLAY/, F•FWD/I_, REW/<
STOP/v , RESET/EXIT, POWER and MENU)•
• The "PWR•" and the "VCR" indicator must appear on the VCR's digital display•
• Turn on the TV and set the TV to channel 3 or 4• Now set the CH3/CH4 switch on the back of
the VCR to match the channel selected on the TV•
1 Select "SETTING CLOCK"
Press the MENU button• The SETTING CLOCK menu appears•
• The number buttons on the remote control do not work in this Menu mode.
• When you press the F•FWD/!_ button during steps [2] to [6], you may move forward to the
next step.
• Press the REW/4 button to go back one step from the current step during steps [3] to [7]•
2 Select the month
Press the PLAY/or STOP/Y button repeatedly until the desired month appears•
(Example: March - 03)
Then, the press F•FWD/_ button•
3 Select the day
Press the PLAY/': or STOP/v button until the desired day appears• (Example: 1st - 01)
Then, press the F•FWD/) button•
4 Select the year
Press the PLAY/' or STOP/V button until the desired year appears•
(Example: 1998)
Then, press the F•FWD/) button•
5 Select the hour
Press the PLAY/: or STOP/Y button until the desired hour appears•
(Example: 05)
Then, press the F•FWD/_ button•
6 Select the minute
Press the PLAY/_: or STOP/v button until the desired minute appears•
(Example: 40)
Then, press the F•FWD/!_ button•
7 Select "AM" or "PM"
3!