The Time Search function makes it possible to quickly advance the tape to your desired
position simply by entering the exact amount of playback time you want to skip.
Example: To watch a program after 2 hours and 50 minutes from the present position, in
either direction.
• You can choose the time search mode by pressing the TIME SEARCH button on the
remote control. Then continue with step [3].
1 Select "SEARCH SELECT"
Press the MENU button until the SEARCH SELECT menu appears.
2 "TIME SEARCH"
Press the PLAY/' or STOP/v button to point to "TIME SEARCH". Then, press the F.FWD/)
button.
3 Enter your desired time
Press the PLAY/:: or STOP/v button until your desired time appears. ( "2:50" stands for 2
hours 50 minutes)
• The Time Search mode will be cancelled if the procedures are not activated in 30 seconds.
4 Begin Time Search
By pressing the REW or F.FWD button, the VCR will rewind or fast forward to the specified
point.
The time counts down as the searching progresses.
5 After Time Search
Playback starts automatically when 0:00 is reached.
• A video cassette must be inserted in the VCR for this function to work.
• Time Search can be set up to a maximum of 9 hours 59 minutes (9:59).
• This function will not operate in the recording mode.
• When you want to cancel the Time Search while in progress, press the STOP button.
49