Filter
Top Products
The "PWR." and the "VCR" indicator must appear on the VCR's digital display.
Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of
the VCR to match the channel selected on the TV.
1 Insert a prerecorded tape
Counter mode appears at 0:00:00 on the TV screen. If the erase-protection tab has been
removed, the VCR will start playback automatically.
2 To begin playback
Press the PLAY button.
NOTE: If any menu is activated on the TV screen, the PLAY button on the remote control does
not function. Press the RESET/EXIT button to clear the menu. Then, press the PLAY button.
If a tape is already in the VCR with power off
2A) Using button on the VCR
Just press the PLAY button on the VCR. Power will automatically turn on and playback will
start. (Direct Button Operation)
2B) Using button on the remote control
Press the POWER button to turn on the VCR, and then press the PLAY button on the remote
control.
3 To stop playback
Press the STOP button.
37