Filter
Top Products
This feature provides a method of indexing the starting point so that it can be easily returned to
in either fast forward or rewind mode.
•The index mark will be made automatically when the REC button is pressed• It will also be
marked at the starting point of Timer recording, IRT•
•The index mark will not be recorded ifthe PAUSE button on the remote control is pressed
and released during recording•
•The time gap between making the index marks on the tape should be greater than 1 minute
for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording•
Example: You are watching program number 4 and want to fast forward to program number 7•
You must skip three programs•
CURRENT PL_YBAC_KPROG_M
INDEX MARK
• You can choose the index search mode by pressing the INDEX SEARCH button on the
remote control. Then continue with step [3].
1 Select "SEARCH SELECT"
Press the MENU button until the SEARCH SELECT menu appears•
2 Select "INDEX SEARCH"
Press the PLAY/:: ; or STOP/v button to point to "INDEX SEARCH"• Then, press the
F•FWD/_ button•
3 Enter your desired number
Press the PLAY/': : or STOP/v button until the number of programs that you want to skip
appears•
(Example: "03" for 3 programs)
• The Index Search mode will be cancelled if the procedures are not activated in 30 seconds•
4 Begin Index Search
Press the REW or F•FWD button• The VCR begins rewinding or fast forwarding to the
beginning of desired program•
NOTE: Every time an index signal is skipped, the number in the program indicator decreases
by one•
5 After Index Search
When the preset program is reached, the VCR will start playback automatically.
• A video cassette must be inserted in the VCR for this function to work.
• The number of Index Searches can be set up to 20.
• This function will not operate in the recording mode.
• When you want to cancel the Index Search while in progress, press the STOP button.
47