The channels you no longer receive or seldom watch can be deleted from the memory. (Of
course, you can later add the deleted channel into the memory again.)
• Use the remote control for this procedure,
.The "PWR." and the "VCR" indicator must appear on the VCR's digital display.
. Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of
the VCR to match the channel the selected on the TV.
1 Select "INITIALIZE"
Press the MENU button until the INITIALIZE menu appears.
2 Select "CHANNEL SET UP"
Confirm "CHANNEL SET UP" is pointed to, then press the F.FWD/I_ button.
3 Select "ADD/DELETE CH"
Press the PLAY/:: or STOP/T button to point to "ADD/DELETE CH".
Then, press the F.FWD/_ button.
4 Enter the desired channel number
Press the number buttons or the PLAY/': or STOP/T button until your desired channel
number appears. (Example: CH02)
5 Delete it from memory
Press the F.FWD/_ or REW/_1 button so that "DELETE" flashes on the TV screen.
. To delete another channel, repeat steps [4] and [5]
. If you press the F.FWD/_ or REW/'! button again, the channel is memorized again.
6 Exit the preset mode
Press the RESET/EXIT button to return to TV mode.
NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL(CH) or
v button.
33