Filter
Top Products
3231
You can use the audio receiver volume control in a
different mode (for example, Audio receiver Volume Up
and Volume Down and Mute in Satellite mode) using the
volume punch through feature. You can also have channel
punch through (Channel Up, Channel Down) as well as
eight VCR (or DVD) transport buttons (Play, Stop, Fast
Forward and Rewind, Skip-, Skip+, Pause, Record) operate
in another mode such as in Satellite, Cable and Audio
modes.
1. Go to the SETUP mode by pressing the MAIN and
ENTER buttons simultaneously for three seconds.
2. Press the PUNCH button next to the LCD screen.
3. Press the VOL button on the LCD for Volume Punch
Through, the PLAY button for Transport Punch Through
and the CH button for Channel Punch Through.
4. Select the device you wish to punch through to (1st
device example - Television or Cable box.)
5. Select the device you wish to punch through from (2nd
device example - Audio receiver.)
You are punching through the controls of the second device
to the device that is currently being controlled by any other
buttons.
7. Programming Punch Through Functions
6. Programming Macro Buttons
15. Press MAIN.
16. Press CABLE. (Back to the this device to enter the
appropriate channel.)
17. Press 1, then 3, then 5. (Then press the ENT button if
your cable device requires it.)
18. Press CH UP to save the macro.
19. Press MAIN twice.
Press M1 to test your macro.
It should turn on your Audio device (receiver for example),
then your TV, then your Cable box, then change the input
to Cable on your receiver, then change the Channel on your
Cable box to 135.
Note: You can end your macro on any page you like,
including the MAIN page. We deliberately ended our macro
on the Cable page before we saved it, since that is where
we wanted to be at the end of our macro.