Filter
Top Products
3. Press the VOL button on the LCD for Volume Punch
Through, the PLAY for Transport Punch Through or the
CH for Channel Punch Through depending upon which
Punch Through you want to erase.
4. Press the DEVICE button from which you wish to erase
punch through.
5. Press the same DEVICE button once again.
6. Punch through is erased when the same device button is
pressed the second time.
7. Repeat from Step 2 to erase the Punch Through for other
devices.
8. Exit from Punch Through mode by pressing the MAIN
button and then exit from the SETUP mode by pressing the
MAIN button once again.
2. Erase Macro Functions In The Ten Device Buttons
1. Go to the SETUP mode by pressing the MAIN and
ENTER buttons simultaneously for three seconds.
2. Press the ERASE button next to the LCD screen.
3. Press the MACRO button.
4. Press the KEY button.
5. Press one of the ten DEVICE buttons from which you
wish to erase the macro function and then press the SURE?
button at the next LCD screen.
6. Exit from Macro mode by pressing the MAIN button and
then exit from SETUP mode by pressing the MAIN button
once again.
D. Erasing Punch Through Functions
1.
Go to the SETUP mode by pressing the MAIN and
ENTER buttons simultaneously for three seconds.
2. Press the PUNCH button next to the LCD screen.
8. Erasing Existing Programming 8. Erasing Existing Programming
3837