Filter
Top Products
Connecting the External Equipment
16. Connecting the External Equipment
You can connect additional equipment, such as VCRs, DVD, etc. to your set.
Examples are shown below.
Connecting the Aerial
To view television channels cor rectly, a signal must be received by the set
from one of following sources :
+ An outdoor aerial
+ An indoor aerial ( not recommended )
1. Connect the aerial to the ANT IN on the bottom of the LCD-TV.
2. Press the TV/AV button on the remote control.
3. Select Analog TV or Digital TV.
Connecting the PC
1. Turn off your computer and LCD-TV.
2. Connect a P C D-Sub cable between your PC and PC INPUT of the LCD-TV and
then fasten the screws of both sides on the cable.
3. Connect a PC Audio Cable between the Sound Output jack of the sound card
on your PC and the AUDIO INPUT of the LCD-TV.
4. Connect the Power cable to the AC INPUT jack on the rear of your LCD-TV.
And connect power code to a power outlet.
5. Power on your PC before turning on the LCD-TV.
ANT IN
PC INPUT
AUDIO INPUT
AC INPUT