Filter
Top Products
If new software is found when powering on
1. A message will be displayed to notify that new software is found.
2. Select Yes and press the OK button to update the software.
3. Starts downloading new software. Please wait until the updated is completed.
4. When completing the software update, the equipment is automatically powered
off and on again.
If updating software from Menu
1. Press the DTV SETUP button.
2. Select Installation using the
GGGG̵/̷ button, and press the
OK or ൘ button.
3. Select Software update using
the ̵/̷ button, and press the
OK or ൘ button.
Automatic Update
You can set the LCD-TV to find HUMAX software updates and update software
automatically.
1. Select Automatic Update using
the ̵/̷ button, and press the
OK or ൘ button. Automatically
search for new software.
2. When detecting updated software,
the following result is displayed.
If new software is not found by
Automatic Update, use
Manual Update.
3. Select Yes and press the OK button
to start updating. Select No and
press the OK button to return to
the previous menu without updating. Select Later and press the
OKbutton to update later. That means the update menu displays
as soon as you turn on the LCD-TV next time.
4. Performs Software Update. Please wait until it is completed.
5. When completing the software update, the LCD-TV is automatically powered
off and on again.
Software Upgrade
64. Software Upgrade