Filter
Top Products
Software Upgrade
66. Software Upgrade
Software Auto-Detecting and Time
You can specify the software detecting time. If the LCD-TV powers on during
software auto-detecting, Detecting will stop.
1. Select Software Auto - Detecting using the ̵/̷Gbutton, and press
the OK or ൘Gbutton.
2. Select Enable or Disable and press the OK or ൘Gbutton whether or not
setting the software detecting time automatically.
3. When you select Enable, you can set the detecting time in the
Auto - Detecting Time.
Software Update from PC
You can connect your LCD-TV to the PC directly and update your software by
transfer ring the new software from the PC. Follow these steps to download new
software from a PC to this LCD-TV.
1. Download new software file(HDF) suitable for this LCD-TV model from our
website into your computer (http://www.humaxdigital.com).
2. Download and install download tool from our website into your computer.
3. Connect your PC to this LCD-TV with an RS-232C serial cable(not supplied).
4. Execute installed download tool, and then follow the instructions contained
within the download tool.
5. Reconnect the power cable of the LCD-TV and press the STANDBY button
to start download.
You can also start download using only the STANDBY button.
Switch off the LCD-TV by pressing the STANDBY button and press again
the STANDBY button after about 1 minute.
RS-232C