Filter
Top Products
20
www.insignia-products.com
Maintaining
Handling and cleaning the DVD/VCR
Shipping the DVD/VCR
Please save the original shipping carton and
packing materials. If you need to ship the
DVD/VCR, for maximum protection, re-pack the
it as it was originally packed at the factory.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as insecticide
spray near the DVD/VCR.
• Do not leave rubber or plastic products in contact
with the DVD/VCR for a long period of time
because they can leave marks on the surface.
Cleaning the case
• To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution.
• Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage
the surface of the player.
Maintaining the DVD/VCR
This DVD/VCR is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are
dirty or worn, the picture quality could be
diminished.
Depending on the operating environment,
regular inspection and maintenance are
recommended after every 1,000 hours of use.
For details, please contact your nearest
authorized service center.
Care and handling of discs
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
the disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
The
DVD/VCR
does not
start
playback
No disc or tape is
inserted
Insert a disc or tape (make sure
that the disc or tape indicator in
the display window is lit)
An unplayable disc
is inserted
Insert a playable disc. (Check
the disc type and Regional
code.)
The disc is placed
upside down
Place the disc with the
playback side down
The disc is not
placed within the
guide
Place the disc on the disc tray
correctly inside the guide
The disc is dirty Clean the disc
The Rating level is
set
Cancel the Rating function or
change the rating level
Video tape
cannot be
inserted
The cassette
compartment may
not be empty
Eject the tape
The remote
control does
not work
correctly
There is an obstacle
in the path of the
remote control and
your DVD/VCR
Remove the obstacle
The batteries in the
remote control are
exhausted
Replace the batteries with new
ones
The remote control
is not pointed at the
remote sensor of the
DVD/VCR
Point the remote control at the
remote sensor of the DVD/VCR
The remote control
is too far from the
DVD/VCR
Operate the remote control
within 23ft (7m)
This remote control
uses the same
buttons for VCR and
DVD functions, such
as PLAY
When using a VCR, first press
the VCR button. When using a
DVD, first press the DVD
button
The
camcorder
image is not
shown
The camcorder is off Turn camcorder on and operate
it correctly
The
camcorder
image is not
shown on TV
screen
The DVD/VCR’s
source is set
incorrectly
Use INPUT to select the correct
input channel (LINE1 or LINE2)
Timer
recording is
not possible
The DVD/VCR clock
is not set to the
correct time
Set the clock to the correct
time
The timer has been
programmed
incorrectly
Reprogram the timer
The TIMER Record
indicator light does
not appear after
programming the
timer
Reprogram the timer and turn
off the DVD/VCR to enable the
timer
Cannot
record or did
not record
successfully
The remaining blank
space on the tape is
insufficient
Use another tape
The source you are
trying to record is
copy-protected
You cannot record the source
Stereo Audio
Record or
Playback is
not present
TV is not
Stereo-compatible
No solution
Broadcast program
is not in stereo
format
No solution
DVD/VCR LINE Out
jacks are not
connected to TV
A/V In jacks
Make A/V connections. Stereo
is available only on A/V output
from DVD/VCR.
DVD/VCR
Audio/Video Out is
not selected for
viewing at the TV
Select AUX or A/V source as TV
input
NS-DVDVCR.fm Page 20 Saturday, December 23, 2006 9:52 AM