Insignia NS-51P680A12 Flat Panel Television User Manual


 
20
NS-51P680A12/NS-59P680A12
www.insigniaproducts.com
Turning on your T V for the
first time
The first time you turn on your TV, the Plug & Play
wizard opens. The Plug & Play wizard guides you
through setting up basic settings including the
menu language, TV signal source, the channel list,
and time.
To set up your TV:
1 Make sure that you have:
Installed the remote control batteries. (See
page 8 for details.)
Connected an antenna, cable TV, or satellite
TV. (See pages 11 through 14 for details.)
Connected the power cord. (See page 11 for
details.)
2 Press (power). The Plug&Play Select Language
of the OSD menu opens.
3 Press ENTER to access the menu, then press
S or T to highlight a language. You can select
English, French, or Spanish.
4 Press ENTER. The Select Home Use when
installing this TV in your home screen appears.
5 Press
W orX to highlight Home Use, then press
ENTER. The Select the Antenna source to
memorize screen appears.
6 Press
S or T to highlight your TV signal source,
then press ENTER. You can select Air (antenna),
Cable (cable TV), or Auto (both antenna and
cable TV). If you have digital cable, select Auto.
7 If you select Cable, press
S or T, W or X to
highlight the cable TV signal type, then press
ENTER. You can select STD, HRC, or IRC for
analog (antenna-based or without a cable box)
or digital signals. STD is the most common
setting. If you do not know which type of cable
TV signal you have, contact your cable TV
provider.
Your TV starts searching for channels available in
your viewing area. The channel information is
stored in the channel list. Scrambled channels are
not stored in the list.
Note
You can also access these settings from the on-screen
menu.
Press MENU on the remote control, press
S or T to
highlight SETUP, then press ENTER. Press
S or T to
select Plug&Play, press ENTER, then press
S or T to
select the setting you want to adjust.
Note
Store Demo mode is only intended for use in retail
environments.
If your TV is accidentally set to Store Demo mode,
reset the Plug & Play option. For more information,
see “Resetting the Plug & Play option” on page 44.
Plug & Play
Select Language of the OSD.
Language : English
Select ‘Home Use’ when installing this TV in your home.
Plug & Play
Home Use
Store Demo
Note
Standard Cable TV (STD) - The most widely used
method of spacing and transmitting television
channels on a cable television system to prevent
interference between the different channels. If
your first broadcast channel is channel 2, then
your cable company uses Standard. If your first
broadcast channel is channel 1, then your cable
company uses the HRC (Harmonic Relate
Carrier) method.
Harmonic Related Carrier (HRC) - Harmonic
Related Carrier is a method of spacing and
transmitting television channels on a cable
television system to prevent interference. The
channels are spaced at 6-MHz intervals, with all
carrier frequencies harmonically related to a
common reference.
Incremental Related Carriers (IRC) - A method of
spacing and transmitting television channels on
a cable television system that prevents
interference between the channels and reduces
a form of distortion.
Note
To stop the search, press ENTER.
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
Start
Start
Start
Plug & Play
Auto Program in Progress.
Stop
3%
DTV Air : --
DTV Cable : --
Air : 8
Cable : --
11Air