Filter
Top Products
6
NS-51P680A12/NS-59P680A12
www.insigniaproducts.com
Front Back
# Item Description
(power)
Press to turn your TV on or off (standby mode). When
you turn off your TV, power still flows into it. To
disconnect power, turn off the surge protector (if you
are using one) or unplug the power cord.
SOURCE button
Press to select the video input source. For more
information, see “Selecting the video input source” on
page 22.
In on-screen menus, this button functions like the
ENTER button on the remote control.
MENU button Press to open the on-screen menu.
VOL+/VOL– buttons Press to increase or decrease the volume.
CH /CH buttons
Press to tune to the next or previous channel in the
channel list. For more information, see “Selecting a
channel” on page 24.
Power indicator
Blinks, then turns off when you turn on your TV. Lights
red when your TV is off (standby mode).
Remote control sensor Receives signals from the remote control. Do not block.
Speakers Outputs the sound from your TV.
SOURCE
SOURCE
1
2
3
4
5
6
7
8
# Jack Description
Power in Connect the power cord to this jack.
ANT IN
Connect the cable for an outdoor antenna or cable
TV to this jack. For more information, see
“Connecting an antenna or cable TV (no box)” on
page 14 or “Connecting a cable or satellite box” on
page 11.
DIGITAL AUDIO OUT
(OPTICAL)
Connect a digital audio amplifier to this jack. For
more information, see “Connecting a digital audio
amplifier” on page 19.
SERVICE1 Used for service only.
SERVICE2 Used for service only.
DVI AUDIO IN
Connect the audio for a DVI device to this jack. For
more information, see “Connecting a DVI device”
on page 18.
HDMI IN 1 (DVI)/
HDMI IN 2
Connect an HDMI device to either HDMI jack. For
more information, see “Connecting an HDMI
device” on page 17.
Connect a DVI device to the HDMI IN 1 jack. For
more information, see “Connecting a DVI device”
on page 18.
COMPONENT IN 1 PR, PB, Y
and R-AUDIO-L
AV1 IN VIDEO and
R-AUDIO-L
Connect a component video device to these jacks,
or connect an analog video device to the Y/VIDEO
jack and the audio jacks. For more information, see
“Connecting a component video device” on
page 18 or “Connecting a VCR” on page 16.
COMPONENT IN 2 PR, PB, Y
and AUDIO L/R
Connect a component video device to these jacks.
For more information, see “Connecting a
component video device” on page 18.
1
2
3
4
5
6
7
8
9