Filter
Top Products
5
www.insigniaproducts.com
Installing a wall-mount bracket
To install a wall-mount bracket:
1 If the stand is installed, remove the stand.
2 Attach the wall-mount bracket to the back of
your TV using four M8 screws (not included).
TV components
Accessories
Make sure that the following accessories are
provided in the packaging:
Cleaning cloth
The cleaning cloth is for cleaning the TV screen
only. Do not use the cleaning cloth to clean any
other part of your TV.
Warning
This apparatus is intended to be supported by a UL
Listed wall-mount bracket.
Warning
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of hazards,
do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
Warnings
• Make sure that you use M8 screws. Screws with
other dimensions may cause damage to the
inside of your TV.
• For wall mounts that do not comply with the
VESA standard screw specifications, the length
of the required screws may differ. Do not use
screws that do not comply with the VESA
standard screw specifications.
• Do not exceed a 15° tilt when mounting your TV.
Accessories
Remote control with two
AAA batteries
Power cord
Ferrite core
M4 X L12 screws (4)
M4 X L8 screws (4)
Cleaning cloth
Important Information
Document and
Quick Setup Guide