Insignia NS-BRDVD DVD Player User Manual


 
18
Insignia NS-BRDVD Blu-ray Disc Player
www.insignia-products.com
Creating a playback loop
You can play a section of a Blu-ray Disc, DVD, or
audio CD repeatedly.
To create a playback loop:
1 During playback, find the place where you
want the playback loop to begin, then press
A-B. If you want to cancel the starting point,
press CLEAR, then when you find the new
starting point, press A-B.
2 Play the disc until you reach the place where
you want the playback loop to end, then
press A-B. The playback loop starts playing
immediately.
3 To cancel the playback loop, press A-B.
Creating a program
You can create a program for audio CD tracks
and JPEG, MP3, or WMA files.
To create a program:
1 In stop mode, press MODE. The program
screen opens.
2 For an audio CD, press or to select a
track, then press ENTER.
Or, for a JPEG, MP3, or WMA disc or SD
Memory Card, press or to select a folder
(if necessary), then press ENTER. Press
or to select a file, then press ENTER.
3 Repeat Step 2 to add additional tracks or files
to the list.
4 To delete the last track or file you added,
press CLEAR. To delete all tracks and files
you added, press or to select All Clear
at the bottom of the list, then press ENTER.
5 Press PLAY to start playback.
Controlling program playback
To control program playback:
To open the program screen, press STOP
twice. To close the program screen and
return to the program, press RETURN ,
then press PLAY .
To repeat the current track or file in the
program, press REPEAT repeatedly until
Track appears on the display.
To repeat the entire program, press
REPEAT repeatedly until All appears.
Using random play
You can play audio CD tracks or JPEG, MP3, or
WMA files in random order.
To use random play:
1 In stop mode, press MODE twice. The
Random
screen opens.
2 Press PLAY . Tracks or files play back in
random order.
Controlling random play
To control random play:
To set a resume point, press STOP once.
Press PLAY to resume playback. An audio
CD track starts playing where you stopped. A
JPEG slide show starts playing at the file
where you stopped.
To cancel random play, press STOP twice.
The
Random
screen opens. Press MODE.
Random play is cancelled.
To repeat the current track or file, press
REPEAT repeatedly until Track appears
on the display.
To repeat the entire random selection, press
REPEAT repeatedly until All appears.
Note
The beginning and ending points of the
playback loop must be in the same title or track.
The playback loop feature may not work with all
scenes.
The playback loop feature does not work when
your player is in regular repeat mode.
Notes
If you open the disc tray, remove the SD
Memory Card, or turn off the power, the
program is cleared.
You cannot select a track to play or use random
play during program playback.
Note
You cannot go to the previous track or file during
random play.