Filter
Top Products
43
Insignia 32" LCD TV/Blu-ray DVD Combo, 1080p
www.insigniaproducts.com
Selecting the PCM downsampling rate
To select the PCM downsampling rate:
1 Press BD to switch to Blu-ray mode.
2 Press SETUP. The Setup Menu opens.
3 Press or to select Audio, then press to
move to the list of options.
4 Press or to select PCM Downsampling,
then press .
5 Press or to select 48KHz or Off.
6 Press to save your selection and return to the
previous menu level.
Or
Press SETUP to close the Setup Menu.
Turning dynamic range control on or off
Dynamic range control only works when your
TV/Blu-ray combo detects a Dolby Digital signal.
To turn dynamic range control on or off:
1 Press BD to switch to Blu-ray mode.
2 Press SETUP. The Setup Menu opens.
3 Press or to select Audio, then press to
move to the list of options.
4 Press to select Dynamic Range Control, then
press .
5 Press or to select:
• On—Select this option if you play movies at
low volume or if you have small speakers. Your
TV/Blu-ray combo uses compression to make
low-audio content easier to hear and prevent
high-audio content from getting too loud.
• Auto—Select this option to listen to movies at
the dynamic range they were recorded in.
• Off—Select this option if you do not want to
use the DRC feature. The DRC gain value is
ignored, and the audio program is reproduced
with full dynamic range.
6 Press to save your selection and return to the
previous menu level.
Or
Press SETUP to close the Setup Menu.
Note
If you set the PCM downsampling rate incorrectly,
audio output may be unpredictable.
On
Auto