Filter
Top Products
12
Insignia NS-R27TR 27" Round Tube TV/DVD/VCR Combo
www.insignia-products.com
Selecting a TV, DTV, or VCR sound mode
MTS (multi-channel television sound) lets you
listen to or record audio other than the main
audio for a channel or videotape. You can listen
to or record audio in monaural, stereo, or SAP
(secondary audio program).
To select the sound mode:
• When you are receiving an MTS broadcast or
watching a videotape, press the MODE
button one or more times.
• For TV, you can select STEREO, SAP, or
MONO.
• For DTV, you can select an audio
language. The language you can select
depends on the languages available for
the program.
• For VCR, you can select MONO or HIFI.
Setting the clock
You need to set the clock if you want to set up a
VCR timed recording.
To set the clock manually:
1 Press the SETUP button.
2 Press the or button to select CLOCK
SETTINGS, then press the ENTER button.
The
CLOCK SETTINGS
screen opens.
3 If you have a PBS station in your area, press
the or button to select AUTO CLOCK
CH, then press the or button to the PBS
channel number.
Or, if you do not have a PBS station in your
area or your cable service does not provide a
PBS station, press the or button to
select AUTO CLOCK, then press the ENTER
button to turn off the AUTO CLOCK option.
4 Press the or button to select MANUAL
CLOCK SET, then press the ENTER button.
5 Press the or button to set the month,
day, year, hour, and minute. Press the or
button to move to a different item.
6 Press the SETUP button to save your
settings.
To automatically set the clock:
1 If you are using a cable box or satellite
receiver, make sure that it is turned on and
tuned to the PBS station. Also make sure that
your TV combo is set to the output channel
for your cable box or satellite receiver
(usually 3 or 4).
2 Press the SETUP button.
3 Press the or button to select CLOCK
SETTINGS, then press the ENTER button.
The
CLOCK SETTINGS
screen opens and
AUTO CLOCK is selected by default.
4 If the AUTO CLOCK option is not set to ON,
press the ENTER button to turn on the
option.
Note
• For TV mode, the initial sound mode setting is
STEREO. Your TV combo automatically plays
stereo sound unless you select SAP
beforehand.
• If you select SAP when no secondary audio
programming is available, the main audio
plays.
• If you press the MODE button when you are
using an external device, nothing happens.
• The sound mode setting is reset to STEREO
when your turn off your TV combo or unplug
the power cord.
Note
For VCR mode, the initial sound mode setting is
HIFI. When you play a videotape that was not
recorded in stereo, your TV combo plays mono
even if the setting is HIFI.
Note
• We recommend that you set the clock
manually, then turn on the auto clock setting so
that your TV combo can adjust the time
periodically.
• You must use the remote control to set the
clock.
• If you unplug the power cord or lose power for
more than three seconds, you may have to
reset the clock.
Note
Although the seconds are not displayed, they start
counting from 0 when you press the SETUP
button.
NS-R27TR.fm Page 12 Thursday, March 29, 2007 11:41 AM