Filter
Top Products
56
Connecting Your Devices
Notes:
• To watch video from your digital source device, make sure your TV is displaying INPUT 1 by
pressing the V1 button on your remote control.
• This TV can accept 480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz, 1080p/60Hz,
1080p/30Hz and 1080p/24Hz signals via HDMI.
• The INPUT 1 HDMI ANALOG AUDIO input can only be used with INPUT 1.
Connect a Camcorder
Notes:
• To watch video from your camcorder, make sure your TV is displaying INPUT 4 or INPUT 5
by pressing the V4 or V5 button on your remote control.
• If your device has S-Video Output, you can use that instead of using Composite Cables.
Connect INPUT 4 (S-VIDEO) and S-Video Output with an S-Video Cable.
Connect a Digital Source Device
INPUT 1 INPUT 2 INPUT 3
75 Ω
(VHF/UHF)
DIGITAL OUT
LR
AUDIO OUT
TV Rear Panel
(INPUT 1
HDMI ANALOG AUDIO)
TV Rear Panel (INPUT 1)
TV Rear Panel (INPUT 4)
Digital Source Device
After the connections have been made,
tighten the screws to secure the cable.
Camcorder
EN_LT32P510.indb 56EN_LT32P510.indb 56 10.6.1 6:01:50 PM10.6.1 6:01:50 PM