Filter
Top Products
38
Further preparation
AV32L5/P10EKEI / LCT0909-001A-U / English
Equipment which can output the
Equipment which can output the Equipment which can output the
Equipment which can output the
S-VIDEO signal (Y/C signal) such as
S-VIDEO signal (Y/C signal) such asS-VIDEO signal (Y/C signal) such as
S-VIDEO signal (Y/C signal) such as
an S-VHS VCR
an S-VHS VCRan S-VHS VCR
an S-VHS VCR
Connect the equipment to an EXT terminal (but not the
EXT-1 terminal).
You can choose between an S-VIDEO signal (Y/C signal) and
a regular video signal (composite signal). For details of how
to operate the equipment, see “S-IN (S-VIDEO input)” on
page 26.
T-V LINK compatible VCR
T-V LINK compatible VCRT-V LINK compatible VCR
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible VCR to the
EXT-2 terminal. If not, the T-V LINK function will not work
properly.
• When connecting a T-V LINK compatible VCR to the
EXT-2 terminal, be sure to connect the decoder to the
VCR. If not, the T-V LINK function may not work properly.
After you have stored TV channels in the programme
numbers (PR) list, set the DECODER (EXT-2) function for
the programme number (PR) to ON to unscramble a
scrambled TV channel. For details, see “Using the
DECODER (EXT-2) function” on page 35.
Connecting headphones
Connecting headphonesConnecting headphones
Connecting headphones
Connect the headphones with a stereo mini-jack (3.5mm
diameter) to the headphone jack at the TV front panel.
Video or sound signal output from
Video or sound signal output fromVideo or sound signal output from
Video or sound signal output from
the EXT-2 terminal
the EXT-2 terminalthe EXT-2 terminal
the EXT-2 terminal
You can change over the output of the video/sound signal
from the EXT-2 terminal. This is useful when you want to dub
the video/sound from another device onto the VCR connected
to the EXT-2 terminal. For details on how to do this, see
“DUBBING” on page 27.
TV output from the EXT-1 terminal
TV output from the EXT-1 terminalTV output from the EXT-1 terminal
TV output from the EXT-1 terminal
The video/sound signal of a TV channel you are viewing is
always output from the EXT-1 terminal.
• Changing over a programme number (PR) also changes
over the TV output from the EXT-1 terminal.
• The video/sound signal from an EXT terminal cannot be
output.
• Teletext programmes cannot be output.
■
■■
■
Listening to Dolby Digital
Listening to Dolby Digital Listening to Dolby Digital
Listening to Dolby Digital
audio (Only AV32P10EK and
audio (Only AV32P10EK and audio (Only AV32P10EK and
audio (Only AV32P10EK and
AV32P10EI)
AV32P10EI)AV32P10EI)
AV32P10EI)
In order to listen to Dolby Digital audio which is recorded as a
Dolby Digital programme source (such as a DVD-video disc),
connect the device and set the DIGITAL-IN as described
below.
Preparation:
•A device (such as DVD player) with a digital output terminal
(coaxial or optical) for Dolby Digital is necessary.
•A coaxial cable or optical cable is necessary to make the
connections. (Not supplied with the TV)
•In accordance with the instruction manual which is supplied
with the device, correctly connect a coaxial cable or optical
cable to the device’s DIGITAL OUT (digital output) terminal
and set the device so that the Dolby Digital audio signal is
output.
•Correctly connect the device to the EXT terminal in
accordance with “Connecting external equipment” on
page 37. However, since the EXT-4 terminal does not work
with Dolby Digital audio, it cannot be used.
1
Connect the device to the DIGITAL AUDIO
IN terminal with a coaxial cable
1
or
optical cable
2
2
Connect the device and set the EXT terminal
to DIGITAL-IN in accordance with “DIGITAL-
IN (Only AV32P10EK and AV32P10EI)” on
page 26
This completes the preparation.
• When an optical input and coaxial input are input
simultaneously, the optical input takes precedence.
• When the headphones are used, the sound
becomes normal stereo.
• This TV does not work with digital audio signals
other than Dolby Digital audio. If no sound is emitted
from the speakers, cancel the DIGITAL-IN setting
and change to normal analog sound.
• The sound from the EXT terminal set to DIGITAL-IN
is not output from the EXT-2 terminal.
OPTICAL
COAXIAL
DIGITAL
AUDIO IN
Back of the TV
or
English.book Page 38 Monday, June 18, 2001 4:57 PM