Filter
Top Products
4
AV32L5/P10EKEI / LCT0909-001A-U / English
Setting up your TV
Setting up your TVSetting up your TV
Setting up your TV
■
■■
■
Connecting the aerial and video cassette recorder (VCR)
Connecting the aerial and video cassette recorder (VCR)Connecting the aerial and video cassette recorder (VCR)
Connecting the aerial and video cassette recorder (VCR)
If you are connecting a VCR, follow
A
→
B
→
C in the diagram opposite.
If you are not connecting a VCR, follow 1.
• For more details, see the manuals that came with the
equipment you want to connect.
• The connecting cables are not provided.
• You can watch a video using the VCR without doing
C
.
For details, see your VCR instruction manual.
• To connect more equipment, please see “Further
preparation” on page 37.
•
To connect additional audio equipment, see “Using
additional audio equipment” on page 39.
• To connect other equipment (such as a DVD player) with
a digital output terminal for Dolby Digital, see “Listening
to Dolby Digital audio (Only AV32P10EK and
AV32P10EI)” on page 38.
• If you connect a decoder to a T-V LINK compatible VCR,
set the DECODER (EXT-2) function to ON. For details, see
“Using the DECODER (EXT-2) function” on page 35.
Otherwise, you will not be able to watch scrambled
channels.
To use the T-V LINK functions, you must have a T-V LINK
compatible VCR connected by a SCART cable
C
to the EXT-
2 terminal on the TV. For details about T-V LINK functions,
see “T-V LINK functions” on page 7.
■
■■
■
Connecting the power cord to the mains outlet
Connecting the power cord to the mains outletConnecting the power cord to the mains outlet
Connecting the power cord to the mains outlet
Caution:
•Use only the power source specified on the unit
(AC 220 – 240 V, 50 Hz).
■
■■
■
Putting batteries into the remote control
Putting batteries into the remote controlPutting batteries into the remote control
Putting batteries into the remote control
Use two AAA/R03 dry cell batteries.
Insert the batteries holding the - end, making sure the + and
- terminals are correctly lined up.
To open the battery compartment, slide the door downwards
and lift off. Replace the door by sliding it upwards until it
fastens into place.
• Follow the warnings printed on the batteries.
• Battery life is about six months to one year, depending on
how much you use the remote control.
• If the remote control does not work properly, fit new
batteries.
• The batteries we supply are only for setting up and
testing your TV. Please replace them as soon as you
need to.
• Always use good-quality batteries.
EXT-1
EXT-2
S
EXT-3
S
R
AUDIO OUT
SURROUND
REAR
L
SUB
WOOFER
OPTICAL
DIGITAL
AUDIO IN
COAXIAL
Aerial
75-ohm
coaxial
cable
21-pin SCART
cable
75-ohm
coaxial
cable
AV IN/OUT
terminal
To aerial
input
Back of the TV
VCR
To aerial
output
JVC TV_MF1.fm Page 4 Friday, June 29, 2001 11:18 AM