JVC HM-DR10000EU DVR User Manual


 
EN 19
Digital TBC/NR
(S-VHS/VHS Mode Only)
Your video recorder is equipped with the Digital TBC (Time
Base Corrector) that removes jitter from fluctuating video signals
to deliver a stable picture even with old tapes and rental
cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is "ON".
We recommend that you use the Digital TBC feature when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this video recorder as the player for editing.
ACTIVATE DIGITAL TBC/NR
1
Press DIGITAL TBC/NR so that DIGITAL TBC/NR
indicator lights up.
To turn off DIGITAL TBC/NR, press DIGITAL TBC/NR
again so that the indicator goes off.
NOTES:
If you play back a tape recorded under poor TV reception
condition, there may be cases where the picture becomes
more stable with Digital TBC/NR set to off.
When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
When playing back a MESECAM tape, Digital TBC/NR does
not function even though the indicator is lit.
Digital 3R
(S-VHS/VHS Mode Only)
Digital 3R picture system applies edge correction to the luminance
and chrominance signals to enhance detail.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS MODE SET
SCREEN
2
Move the highlight bar
(pointer) to "MODE SET" by
pressing %fi, then press
OK or
#
.
SELECT DIGITAL 3R SET
MODE
3
Move the highlight bar
(pointer) to "DIGITAL 3R"
by pressing %fi, then press
OK or
#
to set to "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
Normally it is recommendable to keep "DIGITAL 3R" set to
"ON".
Depending on the type of tape being used, picture quality
may be better with "DIGITAL 3R" set to "OFF".
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
INITIAL SET
VIDEO NAVIGATION
T
[
5
] =
[MENU] : EXIT
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O. S. D. ON
DIRECT REC ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
NEXT PAGE
[5∞] =
[MENU] : EXIT
DIGITAL TBC/NR indicator
DIGITAL TBC/NR