JVC HM-DR10000EU DVR User Manual


 
24 EN
RECORDING (cont.)
Recording
Features
Record One Programme
While Watching Another
SELECT CHANNEL TO
WATCH
1
Once recording is in progress, all you need to do is to
set the channel controls on the TV for the station you
wish to view.
The programme selected with the TV’s channel
controls appears on the TV screen while the one
selected with the recorder's TV PROG buttons is
recorded on the tape.
If a decoder is connected to the recorder ( pg. 60),
you can select a scrambled channel as well with the
TV channel controls.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 8 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
START RECORDING
1
Press RECORD on the recorder.
ENGAGE ITR MODE
2
Press RECORD again. " " blinks and 0:30 appears on
the front display panel.
SET RECORDING DURATION
3
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the
recorder's front panel.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
– –:– –
0
3
4
4
TV PROG
RECORD