Filter
Top Products
Filename [XVS20AG_07S-VHS.fm]
Masterpage:Left+
26
EN
Page 26 April 9, 2003 10:50 am
OPERATIONS ON S-VHS DECK (cont.)
Next Function Memory
The Next Function Memory “tells” the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
a-
For Automatic Start Of Playback
Press
3
, then press
4
within 2 seconds.
b-
For Automatic Power Off
Press
3
, then press
1
within 2 seconds.
c-
For Automatic Timer Standby
Press
3
, then press
#
(
TIMER
) within 2 seconds.
d-
For Automatic Cassette Ejection After Tape Rewind
Press
3
, then press
x
within 2 seconds.
Repeat Playback
Your unit can automatically play back the whole tape 100 times
repeatedly.
1
Start playback.
Press
4
.
2
Activate Repeat Playback.
Press
4
and hold for over 5 seconds, then release.
●
The Play indicator (
$
) on the front display panel blinks slowly.
●
After playing back a tape 100 times, the unit stops
automatically.
3
Stop Repeat Playback.
Press
8
at any time.
●
Pressing
4
,
3
,
5
or
9
also stops Repeat Playback.
NOTE:
Repeat playback is not possible with a cassette recorded in EP
mode.
Manual Tracking
Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually
by pressing the
PR
buttons.
1
Override automatic tracking.
During playback, press
p
on the remote control.
2
Adjust the tracking manually.
Press
PR +
or
–
on the remote control.
●
Press
p
again to return to automatic tracking.
NOTE:
When a new tape is inserted, the unit enters the automatic
tracking mode automatically.
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing
A.MONITOR
changes the soundtrack as follows:
NOTES:
●
“HIFI L
jh
R” should normally be selected. In this mode,
Hi-Fi stereo tapes are played back in stereo, and the normal
audio track is played back automatically for tapes with only
normal audio.
●
For instructions on recording stereo and bilingual
programmes, refer to page 29.
●
“O.S.D.” must be set to “ON” or the on-screen displays will
not appear. (
੬
pg. 78)
TRACK
USE
On-Screen Display
HI FI
L
j
h
R For Hi-Fi stereo tapes
HI FI
L
j
For main audio of Bilingual tapes
HI FI
h
R For sub audio of Bilingual tapes
NORM
For audio-dubbed tapes
HI FI
NORM
For audio-dubbed tapes
XVS20AG_01.book Page 26 Wednesday, April 9, 2003 10:53 AM