JVC HR-XVS20AA DVD VCR Combo User Manual


 
Masterpage:Right
EN
71
Filename [XVS20AG_09Editing.fm]
Page 71 April 14, 2003 3:03 pm
EDITING (DVD DECK)
Digital Audio
Dubbing
You can dub selected audio from the DVD or Audio CD disc to a
MD etc.
However, it is not possible to dub the copy-protected disc.
Example: Dubbing to a MD
A
Make connections.
Connect the optical cable between the unit and the
digital audio device.
B
Place a disc and load a MD.
For the DVD deck
A
Press
x
on the DVD deck to open the disc tray.
B
Place the disc in the disc tray.
C
Press
x
on the DVD deck to close the disc tray.
For the digital audio device
Insert a MD.
C
Prepare the DVD deck for dubbing.
A
Press DVD and select the audio to be dubbed.
B
Search for the point where you want to start dubbing
by pressing
4
,
5
or
3
then press
8
.
C
Press
3
a little, then press
4
to start playback.
D
Press
9
to pause playback a little before the start
point.
D
Prepare the audio device for dubbing.
Select the input mode.
E
Start dubbing.
A
Press
4
to start playback on the DVD deck.
B
Start recording on the audio device.
F
End dubbing.
Stop recording on the audio device. Then press
8
to stop
playback on the DVD deck.
NOTES:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO
OUTPUT” to “PCM ONLY”. (
pg. 81)
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/S-VHS/DVD switch to the right.
Rear of unit
Note for connection:
Remove the connector cover
from the unit and remove the
protection cap from the
cable.
Digital audio device
(MD deck etc.)
Optical cable
(not provided)
DIGITAL AUDIO OUT
Player
Recorder
XVS20AG_09Editing.fm Page 71 Monday, April 14, 2003 3:03 PM