JVC HR-XVS20AA DVD VCR Combo User Manual


 
Masterpage:Right-No-Heading
EN
27
Filename [XVS20AG_07S-VHS.fm]
Page 27 April 9, 2003 5:28 pm
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B
Select the S-VHS deck.
On the unit
Press
S-VHS/DVD
repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press
S-VHS
so that the S-VHS indicator lights up.
C
Choose a programme.
Press
PR +/–
or the
number keys
to select the channel
you wish to record.
D
Set the tape speed.
Press
SP/LP/EP
(
p
). The current setting appears on the
front display panel or TV screen. Press
SP/LP/EP
(
p
)
again to change the setting while the tape speed is
displayed on the TV screen.
Select the appropriate colour system with “PAL/MESECAM”
and “NTSC”. (
pg. 77, 78)
E
Start recording.
Press and hold
7
and press
4
on the remote control, or
press
7
on the unit.
F
Pause/Resume recording.
Press
9
. Press
4
to resume recording.
You can select channel during the Record Pause mode.
G
Stop recording.
Press
8
. Then press
x
on the S-VHS deck to remove the
cassette.
NOTES:
S-VHS recording is possible only for PAL signals recorded in
the SP or LP mode, or NTSC signals recorded in the SP mode.
S-VHS recording is impossible for NTSC4.43 signals.
S-VHS ET recording is possible only for PAL signals recorded
in the SP mode, or NTSC signals recorded in the SP mode.
When recording in NTSC, if EP is selected, recording will
always be done in the VHS mode even if an S-VHS cassette is
used.
Turn on the TV and select the video channel (or AV
mode).
Slide the
TV/S-VHS/DVD
switch to the right.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
pg. 30)
XVS20AG_07S-VHS.fm Page 27 Wednesday, April 9, 2003 5:28 PM