Filter
Top Products
26 EN
INITIAL SETTING (cont.)
Setting DBS receiver input channel &
brand
After installation, set the DBS receiver’s input channel
and its brand correctly; otherwise, the Controller cannot
work correctly.
A Turn on DBS receiver
Select a channel other than channel 100 or 205
on your DBS receiver.
B Access Main Menu screen on VCR
Press [MENU].
C Access DBS Receiver Set screen
D Select DBS receiver input chan-
nel
•If your DBS receiver is connected to your
VCR’s [ANTENNA IN] terminal on the rear
panel
Press [D E] until the channel number
representing the DBS receiver’s output (“ON
CH3” or “ON CH4”) appears on the screen.
•If your DBS receiver is connected to your
VCR’s [AUDIO/VIDEO] input connectors on
the front panel
Press [D E] until “ON F-1” appears on the
screen.
•If your DBS receiver is connected to your
VCR’s [AUDIO/VIDEO INPUT (L-1)] or
[AUDIO/VIDEO INPUT (L-2)] connectors on
the rear panel
Press [D E] until “ON L-1” or “ON L-2”
appears on the screen.
•If you do not use a DBS receiver
Press [D E] until “OFF” appears on the screen.
•Turn on the VCR and the TV, and select the AV
mode on the TV.
•Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
B
CD
VCR
TV
CABLE
/DBS
A Press [D E] to
move the arrow to
“TUNER SET UP”,
then press [G] or
[OK].
B Press [D E] to
move the arrow to
“DBS SET UP”,
then press [G] or
[OK].
Press [FG] to move
the arrow to “INPUT
CH”.
Your selection
depends on how your
DBS receiver is
connected to your
VCR.
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
DBS SET UP
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
INPUT CH
BRAND
TEST MODE
OFF
40
TUNER SET CABLE SET UP
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
INPUT CH
BRAND
TEST MODE
OFF
40
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
DBS SET UP