Filter
Top Products
70 EN
OTHER USEFUL FUNCTIONS (cont.)
i.LINK Set Up
i.LINK set up for connected device
When you connect i.LINK compatible devices to this
VCR, an i.LINK device number is assigned to each device
in the order of connection.
If you want to change the number, follow the procedure
below.
A Access Main Menu screen
Press [MENU].
B Access i.LINK Set Up screen
A Press [D E] to move the arrow to “INITIAL
SET UP”, then press [G] or [OK].
B Press [D E] to move the arrow to “OTHER”,
then press [G] or [OK].
C Confirm LINC setting
D Reset Number
E Return to normal screen
Press [MENU].
F Set Number again
Connect the external devices one by one.
• Make sure to connect the VCR’s AC power plug
to the AC outlet and turn on the external device
before connection.
• Each device will be numbered in the order of
connection.
NOTES:
• If you do not want to set i.LINK device number, set “LINC” to
“OFF” in step C.
• You cannot use the i.LINK connection depending on the type
of camcorders equipped with the DV connector. In this case,
set “LINC” to “OFF” in step C.
•Turn on the VCR and the TV, and select the AV
mode on the TV.
•Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
ATTENTION:
If the i.LINK setting does not work, press [D-VHS] and [STOP
(L)] on the front panel simultaneously for more than 5
seconds to reset the settings. The cassette is automatically
ejected.
LINC
You can control one of the i.LINK-compatible devices
connected to this VCR with the i.LINK cable. “LINC”
means to select one of the connected devices. After
establishing a LINC with an i.LINK-compatible device,
you’re ready to control the i.LINK device.
LINC (Logical Interface Connection) involves
establishing a logical connection, as the abbreviation
implies.
B - D
AE
VCR
TV
CABLE
/DBS
Check that “LINC” is
set to “AUTO”. If not,
press [FG] to move
the arrow to “LINC”,
then press [D E] to
set to “AUTO”.
Press [FG] to move
the arrow to “RESET
NUMBER”, then press
[OK].
FUNCTION SET UP
INITIAL SET UP
TUNER SET UP
THEN PRESS [OK]
CLOCK SET
JLIP ID
LINC
RESET NUMBER
1
GUIDE CHANNEL
OTHER
SELECT WITH ARROW KEYS
AUTO
SELECT
OK
EXIT
MENU
FUNCTION SET UP
INITIAL SET UP
TUNER SET UP
THEN PRESS [OK]
CLOCK SET
JLIP ID
LINC
RESET NUMBER
1
GUIDE CHANNEL
OTHER
SELECT WITH ARROW KEYS
AUTO
SELECT
OK
EXIT
MENU