Filter
Top Products
EN 39
Other useful functions for recording
You can also use the following functions for
recording.
•“V. CALIBRATION” (S-VHS/VHS only) (A page
63)
When this function is set to “ON”, this VCR checks
the condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
•Second Audio Recording (A page 64)
This VCR’s built-in MTS decoder enables reception
of Multichannel TV Sound broadcast.
To record a SAP program received, set “2ND
AUDIO REC” to “ON” using the menu screen.
NOTES:
When the channel is changed on the VCR;
•The “STEREO” indication appears on the screen for about
5 seconds if the program is a stereo broadcast.
•The “SAP” indication appears on the screen for about 5
seconds if the program is a SAP broadcast.
•The “SAP STEREO” indication appears when a stereo
program is accompanied by SAP sound.
•S-VHS Recording Mode (A page 67)
This VCR allows you to record on a D-VHS and S-
VHS tape with VHS picture quality.
•“S-VHS ET” (A page 68)
This function allows you to record on VHS tapes
with S-VHS picture quality. Tapes recorded using
this function can be played back on a VCR
equipped with the S-VHS ET function.
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive
tape.
Record safety tab