Filter
Top Products
EN 29
Basic Playback
Features
A Checking tape position
The position of “Z” in relation to “B” (Beginning) or “E”
(End) shows you where you are on the tape.
NOTES:
• “SUPERIMPOSE” must be set to “ON”, or the indicator will
not appear (
A page 66).
• It may take a few seconds for the tape position indicator to be
displayed.
To reset the time counter, press [C. RESET] on the
Remote. The counter reading becomes “0:00:00”. It is
also reset when a tape is inserted.
B Playing back tape repeatedly
— Repeat Playback
You can play back a tape repeatedly (50 times).
While playing back a tape, press and hold [PLAY (I)] for
more than 5 seconds.
The play indicator [E] on the front display panel starts
flashing slowly, and a tape will be played back 50 times.
To stop playback, press [STOP (L)] on the Remote or on
the front panel.
NOTE:
For a cassette recorded in D-VHS mode, Repeat Playback is not
possible if the cassette was recorded in LS3 mode.
•Turn on the VCR and the TV, and select the AV
mode on the TV.
•Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
EE B
D
C
F
[PLAY(I)]
[STOP (L )]
[POWER]
[TIMER ( )]
[FF (N)]
[REW (O)]
[S][T]
[C.RESET]
C
G
D
BEG
VCR
TV
CABLE
/DBS
The tape position indicator
appears on the screen in the
following cases:
•When you change the VCR
operation mode from the
stop mode to fast forward
or rewind mode.
•When you perform an
Index Search (A page 31).
B E