Filter
Top Products
EN
15
Setting ghost reduction
This VCR is equipped with the ghost reduction function.
It reduces the ghosts using a GCR (Ghost Canceller
Reference) signal sent from a TV station. The ghost
reduction mode can be set for each channel
independently and manually.
NOTES:
●
Ghosts may not be reduced in the following cases:
– The broadcasting signal does not have a GCR signal.
– The antenna is not connected correctly.
– There are too many ghosts.
– The signal is reflecting from moving objects (airplane, etc.).
●
The images on the screen may be distorted when tuning from
one channel to another or the power is turned on while the
ghost reduction function is activated.
1
Access Main Menu screen
Press MENU.
2
Access Tuner Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
“TUNER SET”, then press OK.
On the Remote:
Press %fi to move the highlight bar (arrow) to
“TUNER SET”, then press OK or
#
.
3
Access Manual Channel Set screen
On the front panel:
Press CH5∞ to move the highlight bar (arrow) to
“MANUAL CHANNEL SET”, then press OK.
On the Remote:
Press %fi to move the highlight bar (arrow) to
“MANUAL CHANNEL SET”, then press OK or
#
.
4
Select a channel and set ghost reduction
mode
On the Remote ONLY:
1 Press the Number
keys or %fi to input
a channel number.
2 Press SP/EP ( ) to
select the desired
ghost reduction mode.
You have three choices:
STANDARD – Normally select this
SOFT – Select when you prefer softer picture
than when “STANDARD” is selected.
OFF– Select when neither “STANDARD”
nor “SOFT” improves the picture.
5
Return to normal screen
Press MENU.
1 5
2 3
2 – 3
What is a “ghost”?
Double images of a TV program, or a “ghost”, is a
common problem with TV reception in urban areas. A
broadcasting signal, reflected from some surfaces (building,
mountain, etc.), arrives slightly later than the signals
arriving directly from the TV station. This causes such
ghosts as follows:
– Double images
– Faint images
– Distorted images
– Distorted colors
– Vertically jittered images
MANUAL CHANNEL SET
(CATV)
CH 45 ADD
GR STANDARD
PRESS NUMBER KEY (0–9)
OR (5,∞), THEN (OK)
GR MODE: PRESS (SP/EP)
PRESS (MENU) TO END
123
456
7
89
0
VCR TV CABLE/DBS
1 5
2 – 4
4
2 3
4
HR-S9800U-EN01-22 00.3.29, 7:26 PM15