Filter
Top Products
EN
41
1
Access Main Menu screen
Press MENU.
2
Access Initial Set screen
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to “INITIAL SET”, then
press OK.
On the Remote:
Press %fi to move the
highlight bar (arrow) to “INITIAL SET”, then press
OK or
#
.
3
Access Guide Channel Set screen
On the front panel:
Press CH5∞ to move
the highlight bar (arrow)
to “GUIDE CHANNEL
SET”, then press OK.
On the Remote:
Press %fi to move the
highlight bar (arrow) to “GUIDE CHANNEL SET”,
then press OK or
#
.
4
Input guide channel number
On the front panel:
Press CH5∞ to select
the VCR Plus+ guide
channel number as
shown in the TV listing,
then press OK.
On the Remote:
Press the Number keys
or %fi to input the VCR
Plus+ guide channel
number as shown in the
TV listing, then press OK or
#
.
● If you receive your channels with a cable box
and if you have properly set your Controller,
“CABLE CH” appears in place of “VCR CH”. If
not, refer to pages 16 – 19 and re-perform the
procedure.
(Ex.) When inputting the
guide channel number 6
for WNJU(Ind.)
(Ex.) If WNJU(Ind.) is
received on channel 47
GUIDE CHANNEL SET
GUIDE CH : 6
VCR CH : – – –
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
=
GUIDE CHANNEL SET
CABLE BOX SET
DBS RECEIVER SET
JLIP ID NO. SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
GUIDE CHANNEL SET
GUIDE CH : 6
VCR CH : 47
PRESS NUMBER KEY (0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
MAIN MENU
FUNCTION SET
TUNER SET
=
INITIAL SET
REC LEVEL CTL
VIDEO NAVIGATION
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
5
Input receiving channel number
On the front panel:
Press CH5∞ to select
the number of the
channel on which the
guide channel’s
broadcasts are received,
then press OK.
On the Remote:
Press the Number keys
or %fi to input the
number of the channel on which the guide
channel’s broadcasts are received, then press OK
or
#
.
● Repeat steps 4 and 5 for each instance.
6
Return to normal screen
Press MENU.
HR-S9800U-EN38-45 00.3.29, 7:27 PM41