Filter
Top Products
28
EN
Basic
Recording
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
In addition, this VCR is equipped with the Video
Navigation function, which allows you to quickly
locate the programs you have recorded on a tape.
When recording on this VCR, the tapes are
automatically numbered so that every tape recorded
on this VCR has a different tape number. With this
function, the program information such as recording
date, start time, channel number, and recording
speed are also automatically stored in the VCR’s
memory.
● For the Video Navigation function, see page 46.
To memorize the recording date and start time for
the Video Navigation function, the date and clock
must be set correctly.
1
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape before
inserting the cassette.
2
Select recording channel
On the front panel:
Press CH5∞.
On the Remote:
a– Press CH + or –.
or
b– Press the Number keys.
● If you connect the TV and the VCR only using
the RF connection, press TV/VCR on the Remote
so that the VCR mode indicator lights on the front
display panel, to view the program to be recorded.
3
Set tape speed
Press SP/EP ( ) to set the recording speed.
4
Start recording
On the front panel:
Press REC ( ¶ ).
On the Remote:
While holding REC ( ¶ ), press PLAY ( 3 ).
● If “VIDEO CALIBRATION” is set to “ON”
(default setting: ੬ pg. 57), this VCR checks the
tape condition for about seven seconds, then
starts recording. This means that the first seven
seconds of the program will not be recorded. If
this is inconvenient for you, follow the steps
below:
1 Press REC ( ¶ ) and PAUSE ( 8 ) to start
Video Calibration.
2 Then press PLAY ( 3 ) to start recording
after Video Calibration is complete.
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
STOP/EJECT
( 7 / 0 )
TIME SCAN
SHUTTLE ring
2
PAUSE ( 8 )
PLAY ( 3 )
POWER
4
1
123
456
7
89
0
VCR TV CABLE/DBS
STOP ( 7 )
FF ( ¡ )
REW ( 1 )
3
2 –a
4
2 –b
POWER
PAUSE ( 8 )
TV/VCR
HR-S9800U-EN23-37 00.3.29, 7:26 PM28