Filter
Top Products
60
EN
JLIP
OTHER USEFUL FUNCTIONS (cont.)
* The default setting is bold in the table below.
The TimeScan function enables this VCR to reproduce noiseless pictures
and sounds during special effect playback (੬ pg. 34 – 37).
However, the sounds you hear are monaural, and are not the same as
original sounds recorded on the tape.
If you do not want to hear the sounds during special effect playback
with TimeScan, set “TIMESCAN AUDIO” to “OFF” so that the sounds
will not be heard during special effect with TimeScan.
● For more about the TimeScan function, see page 37.
You have to select which terminal — either VIDEO (composite) or S-
VIDEO (Y/C separate signals) to use as the video input terminal on the
front panel.
Make sure to select the correct terminal; otherwise, you may fail in
recording (editing) on this VCR.
You have to select which terminal — either VIDEO (composite) or S
VIDEO (Y/C separate signals) to use as the video input terminal on the
rear panel.
Make sure you select the correct terminal; otherwise, you may fail in
recording (editing) on this VCR.
Ⅵ REAR AUX INPUT
VIDEO
S-VIDEO
Ⅵ FRONT AUX INPUT
VIDEO
S-VIDEO
Ⅵ TIMESCAN AUDIO
ON
OFF
To AV COMPU
LINK II
(VCR ONLY)
AV COMPU LINK
Television
This VCR
To AUDIO/
VIDEO OUT
Mini-plug cable (not supplied)
Audio/video cable (supplied)
To REMOTE
PAUSE/
AV COMPULINK
To AUDIO/
VIDEO IN
To S-VIDEO
IN
S-video cable (supplied)
To S VIDEO
OUT
HR-S9800U-EN56-63 00.3.29, 7:29 PM60