JVC HR-S9800U VCR User Manual


 
EN
31
Watching one program while
recording another
1 Engage TV mode
During recording...
If you connect the TV and the VCR only using
the RF connection ( pg. 7) to view pictures
from the VCR
Press TV/VCR on the Remote so that VCR mode
indicator goes off from the front display panel.
(The TV broadcast being recorded disappears.)
If you are using the AV connection ( pg. 7) to
view pictures from the VCR, change the TV’s
input mode from AV to TV.
2 Select channel for viewing
Select the channel you want to watch, on the TV.
Showing on-screen display
When “SUPERIMPOSE” is set to “ON” ( pg. 56, 57),
you can see the current VCR status on the TV screen.
For more detailed information about the on-screen
display, see page 80.
1 Display VCR status on TV screen
During recording or
recording pause, press
OSD on the Remote.
All indications
corresponding to the
current VCR status are
displayed for 5 seconds.
The time counter remains
on the screen indicating the elapsed time.
The indications are not recorded.
2 Exit on-screen display
Press OSD again.
NOTES:
If the VCR is in recording pause mode, “RECORD/PAUSE” is
always displayed.
The VCR status can be also displayed during playback.
D
C E
.
Recording on VHS tapes with
S-VHS quality — Super VHS ET
This function allows you to record on VHS tapes with S-
VHS picture quality. Tapes recorded using this function
can be played back only on a VCR equipped with the S-
VHS ET function.
You can activate this function only before you start
recording on a VHS tape.
Before recording, make sure “VIDEO CALIBRATION”
is set to “ON.” ( pg. 57)
1 Select S-VHS ET mode
Press S-VHS ET on the front panel. The S-VHS ET
lamp lights up.
The S-VHS indicator lights on the front display
panel.
To disengage the S-VHS ET mode, press S-VHS ET
again. The lamp goes off.
2 Start recording
On the front panel:
Press REC ( ).
On the Remote:
While holding REC ( ), press PLAY ( 3 ).
NOTES:
You cannot activate the S-VHS ET function...
while recording is in progress.
while timer-recording or Instant Timer Recording (
p.30)
is in progress.
while Video Calibration (
p.57) is in progress.
S-VHS ET does not work with S-VHS tapes.
To keep the highest quality recording and playback pictures
over a long period of time, S-VHS recording on S-VHS tapes
is recommended.
Use of high grade tapes are recommended for S-VHS ET
recordings.
On some tapes, picture quality will not improve even if the S-
VHS ET function is used. Check the recording quality before
you start important recordings.
You can play back S-VHS ET recordings on most of S-VHS
VCRs and of VHS VCRs equipped with SQPB (S-VHS QUASI
PLAYBACK) function. (Notice some VCRs are not compatible
with this function.)
While playing back a tape recorded with this function, noise
may appear. (If playback picture becomes blurred or
interrupted, use a cleaning cassette.)
During special effect playback (
pg. 34), noise may appear.
If special effect playback is performed frequently on a tape
recorded with this function, the tape may be damaged and
picture may be deteriorated
CH 125 RECORD
THU 12:00 AM PAUSE
STEREO ] SP
SAP
GR : STANDARD
INDEX-1
NORM
HI–FI COUNT –1:23:45
BE
+++
HR-S9800U-EN23-37 00.3.29, 7:27 PM31