JVC Model SR-TS1U VCR User Manual


 
EN 21
Simple
Playback
LOAD A CASSETTE
1
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointing towards the VCR. Don’t apply too much
pressure when inserting.
The VCR’s power comes on automatically.
The counter is automatically reset to "0:00:00".
If the cassette's record safety tab has been removed
and the Record Safety mode is set to "ON", playback
begins automatically.
FIND PROGRAM START
POINT
2
If the tape is advanced past the start point, press REW or
turn the SHUTTLE ring to the left. To go forward, press
FF or turn the SHUTTLE ring to the right.
START PLAYBACK
3
Press PLAY. "VIDEO CALIBRATION" appears on the
screen (when VIDEO CALIBRATION is set to "ON"
pg. 36).
STOP PLAYBACK
4
Press STOP or STOP/EJECT. Then press STOP/EJECT
to remove the cassette.
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
JOG
SHATTLE
123
456
7
89
0
2
4
1
3
STOP/EJECT
PLAY
PLAY
REW (Rewind)
FF (Fast-Forward)
STOP
Usable cassettes
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T-90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
* Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
**This VCR can record on regular VHS and Super VHS
cassettes. While only VHS signals can be recorded on
regular VHS cassettes, both VHS and Super VHS signals
can be recorded and played back using Super VHS
cassettes.
SHUTTLE
To prohibit other operations during playback
(Mode Lock)
Press and hold OK on the remote control for more than 5
seconds. The Mode Lock indicator lights up on the front display
panel ( pg. 66). The playback will not be interrupted until the
recording end (unrecorded portion) or tape end is reached (
pg. 28). Only PLAY will function while Mode Lock is activated
( "Repeat Playback", pg. 29).
To resume the other operations, press and hold OK on the
remote control again for more than 5 seconds.
OK