JVC Model SR-TS1U VCR User Manual


 
EN 25
JOG
SHATTLE
MENU
123
456
7
89
0
2
4
1
3
OK
OK
MENU
SHUTTLE PLUS
CH
Picture Control
This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET 1
SCREEN
2
Move the highlight bar
(arrow) to "FUNCTION
SET 1" by pressing CH5
or SHUTTLE PLUS%
,
then press OK or
SHUTTLE PLUS
#
.
SELECT PICTURE CONTROL
SET MODE
3
Move the highlight bar
(arrow) to "PICTURE
CONTROL" by pressing
CH
5
or SHUTTLE
PLUS
%
, then press OK
or SHUTTLE PLUS
#
to
select the desired mode.
AUTO*:Normally select
"AUTO".
It automatically adjusts the picture quality.
* When "VIDEO CALIBRATION" is set to
"OFF" (pg. 36), you can only select
"NORM" instead of "AUTO".
EDIT: Select when you dub tapes.
SOFT: Select when you want to soften the picture.
SHARP: Select when you want to sharpen the picture.
NOTE:
When you select "EDIT", "SHARP" or "SOFT", the
selected mode will not change until you select again.
When you select "EDIT" to dub tapes, be sure to
select "AUTO" (or "NORM" when "VIDEO CALIBRA-
TION" is set to "OFF") after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
Select "EDIT" when you are dubbing tapes. Refer to page 53.
FUNCTION 1
VIDEO CALIBRATION ON
=
PICTURE CONTROL AUTO
AUTO TIMER OFF
AUTO SP
=EP TIMER OFF
VIDEO STABILIZER OFF
2ND AUDIO RECORD OFF
NEXT PAGE
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
MAIN MENU
=
FUNCTION SET 1
FUNCTION SET 2
TUNER SET
INITIAL SET
PRESS (5,), THEN (OK)
PRESS (MENU) TO END