Filter
Top Products
EN 55
SELECT REAR AUX INPUT
SET MODE
6
Move the highlight bar
(arrow) to "REAR AUX
INPUT" by pressing CH
5
∞
or SHUTTLE PLUS
%
fi
, then press OK or
SHUTTLE PLUS
#
to set to
"VIDEO" or "S-VIDEO".
a– VIDEO: When editing
VHS recording
b– S-VIDEO: When editing
S-VHS recording
SELECT “EDIT” FOR PIC-
TURE CONTROL SET MODE
7
Follow the “Picture Control” section on page 26, then
select “EDIT.”
NOTE:
When you select “EDIT” to dub tapes, be sure to select
“AUTO” or (“NORM” when “VIDEO CALIBRATION” is
set to “OFF”) after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
8
Press MENU.
START PLAYER
9
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
10
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
NOTES:
●
If you use an auxiliary input to connect a cable box or DBS
receiver, make sure that the correct REAR AUX INPUT mode
("VIDEO" or "S-VIDEO") is selected after you have finished
editing (
੬
steps 4 – 6 on pg. 54 and 55).
PREVIOUS PAGE
AUDIO MONITOR HI-FI
S-VHS MODE ON
=
REAR AUX INPUT S-VIDEO
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
FUNCTION 1
=
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
AUTO SP
=EP TIMER OFF
VIDEO STABILIZER OFF
2ND AUDIO RECORD OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
JOG
SHATTLE
123
456
7
89
0
2
4
1
3
CH
OK
MENU
CH
MENU
OK
SHUTTLE PLUS