JVC Model SR-TS1U VCR User Manual


 
EN 29
Repeat Playback
JOG
SHATTLE
123
456
7
89
0
2
4
1
3
C.RESET
POWER
DISPLAY
POWER
TIMER
FF
PAUSE
REW
STOP
PLAY
STOP
START REPEAT
1
Press and hold PLAY for more than 5 seconds (until " "
blinks on the front display panel) during playback, then
release.
The entire recording or entire tape is played back as
many times as you want. To select the returning
position (recording end or tape end), see "Returning
Position" on page 28.
STOP REPEAT
2
To stop, press STOP at any time.
NOTE:
Pressing PLAY, REW, FF, PAUSE or SHUTTLE PLUS
or
£
also stops Repeat Playback.
Tape Position Indicator
The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
use the SHUTTLE ring, or perform
an Index Search or Instant ReView.
The position of " " in relation to
"B" (Beginning) or "E" (End) shows
you where you are on the tape.
NOTES:
"SUPERIMPOSE" must be set to "ON", or the indicator will not
appear (
pg. 30).
It may take a few seconds for the Tape Position Indicator to be
displayed.
COUNT 0:33:27
BE
+++
Next-Function Memory
The Next Function Memory “tells” the VCR what to do after
rewinding. Before continuing, ensure that the VCR is in stop
mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer functions if the
cassette's record safety tab is removed and the Record Safety
mode is set to "ON" (
pg. 39).
SP
VCR
RESET COUNTER TO ZERO
1
Press C.RESET.
NOTE:
By pressing the DISPLAY button, you can change the
display to show the counter reading, channel number,
clock time or tape remaining time. (Channel number is
not displayed during playback.)
Counter Reset
PLAY
PAUSE
SHUTTLE PLUS
SHUTTLE
To prohibit operations during Repeat Playback
(Mode Lock)
Press and hold OK on the remote control for more than 5
seconds. The Mode Lock indicator lights up on the front display
panel ( pg. 66). The entire recording or entire tape will be
played back repeatedly without any interruption.
To cancel Mode Lock, press the same button again for more
than 5 seconds.