Filter
Top Products
EN 27
Video Stabilizer
By activating the Video Stabilizer you can correct vertical
vibrations in the picture when playing back unstable EP
recordings that were made on another VCR. When this function
is set to "ON", vertical vibration will be automatically corrected.
*The default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET 1
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET 1"
by pressing CH
5
∞ or SHUTTLE PLUS
%
fi, then press
OK or SHUTTLE PLUS
#
.
ACTIVATE VIDEO STABILIZER
3
Move the highlight bar
(arrow) to "VIDEO
STABILIZER" by pressing
CH
5
∞ or SHUTTLE PLUS
%
fi, then press OK or
SHUTTLE PLUS
#
to set to
"ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
●
When you finish viewing the tape, be sure to set it back to
"OFF".
●
Regardless of the setting, this function has no effect during
recording and during special-effects playback.
●
The Superimpose mode indications may jitter vertically when
"VIDEO STABILIZER" is set to "ON".
●
To watch recordings with close-caption, it is necessary to set
the Video Stabilizer function to "OFF".
FUNCTION 1
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
AUTO SP
=EP TIMER OFF
=
VIDEO STABILIZER ON
2ND AUDIO RECORD OFF
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
JOG
SHATTLE
MENU
123
456
7
89
0
2
4
1
3
OK
OK
MENU
SHUTTLE PLUS
CH