JVC SR-9090U VCR User Manual


 
36
SR-9090U
REC
REC
STOP
REC
CHECK
EJECT
OPERATE
REVERSE
FIELD REV
FIELD ADV
REW PLAY
TRACKING
TIMER
SEARCH
RESET/
CANCEL
DISPLAY LOCK
HDR
CNT RESET
MENU
TIME MODE
SHIFT
ON SCREEN
OPERATE
V. LOCK
PAUSE
FF
+
+
SET
+
RESET/
CANCEL
MENU
TIME MODE
SHIFT
ON SCREEN
SET
+
6-3 Timer Recording
6 RECORDING
Canceling/Changing Timer Recording
Program
To stop timer programming before finishing
1 Press the [RESET/CANCEL] button.
[The program being set is canceled.
2 Press the [MENU] button twice.
[The normal screen mode is restored.
To cancel preset timer programs
1 Press the [TIMER] button so that the TIMER indication
goes out on the display.
2 Turn on the VCR and monitor.
3 Press the [MENU] button to show the main menu screen
and press the [SHIFT 7] button to select <PROGRAM
TIMER> or <HOLIDAY SET>. Then, press the [SET +/–]
button.
[The <PROGRAM TIMER> or <HOLIDAY SET> menu
is shown on the monitor.
4 Press the [SHIFT 7] button or [SHIFT f] button to move
the cursor to the program you want to cancel.
5 Press the [RESET/CANCEL] button.
[The specified timer recording program is canceled.
6 Press the [MENU] button twice.
[The normal screen is restored.
[TIMER] button
[SET –] button
[SHIFT f] button
[SHIFT 7] button
[SET +] button
[MENU] button
[RESET/CANCEL] button
To modify timer programs
1 Press the [TIMER] button so that the TIMER indication
goes out on the display.
2 Turn on the VCR and monitor
3 Press the [MENU] button to show the main menu screen
and press the [SHIFT 7] button to select <PROGRAM
TIMER or <HOLIDAY SET>. Then, press the [SET +/–]
button.
[The <PROGRAM TIMER> or <HOLIDAY SET> menu
is shown on the monitor.
4 Press the [SHIFT 7] button or [SHIFT f] button so that
the section you want to change blinks.
5 Press the [SET +/–] button to change the value.
6 Press the [MENU] button twice.
[The normal screen is restored.
To use the VCR when the Timer-Recording
Standby mode is engaged
Press the [TIMER] button so that the TIMER indication
goes out. After using the VCR, press the [TIMER] button
again to engage the Timer-Recording Standby mode. The
TIMER indication will light.
When all timer recording programs are completed, the
TIMER indication goes out.