Filter
Top Products
Masterpage:Right+
EN 59
Filename [DVM700ER_12Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 59Wednesday, 20 September 2006 10:03
8 DIMMER (DURING POWER OFF) ^ OFF / ON
You can select to light up or turn off the light of the front display
panel when the unit is off.
OFF:
To turn off the light of the front display panel when the unit is off.
ON:
To light up the front display panel when the unit is off.
8 QUICK STARTUP ^ OFF / ON
When this function is set to AONB, operations such as playback can
be performed more quickly upon turning on the unit than when set
to AOFFB. However, the power consumption during standby
increases.
OFF:
To disable the quick startup function.
ON:
Operations can be performed quickly after turning on the unit.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 11
different languages.
For details, refer to AOn-screen Language SetB (A pg. 18).
VIDEO IN/OUT
8 MONITOR TYPE ^ 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs. For
details, refer to AMonitor SetB (A pg. 19).
8 F-1 INPUT ^ VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (F-1)
being used on the front panel.
VIDEO:
To use the [VIDEO] input connector on the front panel.
S-VIDEO:
To use the [S-VIDEO] input connector on the front panel.
8 L-1 INPUT ^ VIDEO / S-VIDEO
Select the appropriate mode depending on the connector (L-1)
being used on the rear panel.
VIDEO:
To use the [VIDEO INPUT] connector on the rear panel.
S-VIDEO:
To use the [S-VIDEO INPUT] connector on the rear panel.
DV SET UP
8 DV AUDIO REC ^12BIT / 16BIT
This is the setting for sound mode before recording on a Mini DV
tape.
12BIT:
Enables Audio Dubbing later.
16BIT:
Audio Dubbing is not possible but the recorded sound quality is
higher than A12BITB
.
8 AUDIO MODE ^ SOUND1 / SOUND2 / MIX
You can select the desired sound mode when playing back an
audio dubbed Mini DV tape.
SOUND1:
Original recorded sound.
SOUND2:
Audio dubbed sound.
MIX:
Original recorded sound and audio-dubbed sound.
NOTES:
● When AAUDIO MODEB is set to AMIXB, both the main and sub
audio will be audible for bilingual tapes.
● To select only the main audio or only the sub audio of bilingual
tapes, set AAUDIO MODEB to ASOUND1B.
NOTE:
To display the ADV SET UPB menu, press SET UP while in the
DV deck mode.
DVM700ER_00.book Page 59 Wednesday, September 20, 2006 10:03 AM