Filter
Top Products
Filename [DVM700ER_12Subsidiary.fm]
Masterpage:Left+
62 EN
SUBSIDIARY SETTINGS
Page 62Wednesday, 20 September 2006 10:03
Cancel The Finalisation Of A DVD-RW Disc
1 Load a DVD-RW disc to cancel the disc finalisation, and
perform steps 1 - 2 of AFinalise A DVD-R/RW DiscB (A pg. 61)
before continuing.
2 Press selection keys to select AHDD/DVD SET UPB, then
press G.
3 Press selection keys to select ADISC SET UPB, then press G.
4 Press selection keys to select
ACANC. FINALIS.B, then press
ENTER.
5 Press selection keys to select
AOKB, then press ENTER.
6 Upon completing cancellation
of finalisation,
ACANCELLATION
COMPLETEDB appears on the
TV screen. Press ENTER to end.
7 Press SET UP to return to the normal screen.
● When the disc finalisation is cancelled, the mode in which the
disc was formatted is restored, making the disc recordable.
(A pg. 7, 60)
NOTE:
It is not possible to cancel the finalisation of a DVD-R disc.
Direct Access To ADISC SET UPB Screen
When you wish to finalise or cancel the finalisation of a disc,
besides accessing the ADISC SET UPB screen through the
SET UP button, you can also use the F2 button on the remote
control. This F2 button enables you to access the ADISC SET UPB
screen directly after loading the disc.
To finalise a disc
A Load the disc.
B Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
C Press F2 to access the ADISC SET UPB screen.
● The screen in step 8 of AFinalise A DVD-R/RW DiscB
(A pg. 61) appears.
D Perform steps 8 – 11 of AFinalise A DVD-R/RW DiscB
(A pg. 61) to finalise the disc.
To cancel finalisation
A Perform steps A – C of ATo finalise a discB above.
● The screen in step 4 of ACancel The Finalisation Of A DVD-RW
DiscB on the left column appears.
B Perform steps 4 – 7 of ACancel The Finalisation Of A DVD-RW
DiscB on the left column to cancel finalisation of the disc.
NOTES:
● The direct access (F2) function works only when in the HDD or
DVD deck mode, on the condition that the Main Menu, Editing,
Library Database Navigation or Dubbing screen is not displayed.
● The direct access (F2) function will not work in the following
cases, and an operation prohibition mark AB appears on the
TV screen.
● During DVD recording or playback.
● Disc is not loaded.
● A playback-only disc is loaded.
● Disc reading in progress.
● Disc information acquisition failure when DVD-RAM is loaded.
● When this unit is in the DV deck mode or when dubbing is in
progress, the direct access (F2) function will also not work.
However, AB will not be displayed.
Video
Video
ENTER
SELECT
SET UP
EXIT
DVD VIDEO SET UP
FINALISE
CANC. FINALIS.
HDD/DVD SET UP
FUNCTION SET UP
INITIAL SET UP
HDD SET UP DVD SET UP
DISC SET UP DV SET UP
FORMAT
SELECT WITH @
PRESS [SET UP] TO EXIT
THEN PRESS [ENTER]
DVM700ER_00.book Page 62 Wednesday, September 20, 2006 10:03 AM