Filter
Top Products
12 EN
INITIAL SETTINGS (cont.)
SHOWVIEW
Setup
With SHOWVIEW, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your recorder is able to recognise.
NOTE:
“Guide Program (GUIDE PROG) Number” refers to the assigned
TV station numbers, according to broadcast area, for S
HOW
V
IEW
timer recording.
IMPORTANT
Perform the following procedure after Auto Set Up on page 6
and/or the channel setting steps on pages 50 – 53, and after the
Clock Set procedure on page 55.
After setting the Guide Program Numbers, the station names and
channel positions may be incorrect if you stored or skipped
channels. In this case, re-perform Guide Program Number setting.
Turn on the TV and select the VIDEO channel (or AV mode).
MAKE LIST OF STORED
STATION NAMES AND
CHANNEL POSITIONS
1
(Ex.)
ACCESS MAIN MENU
SCREEN
2
Press MENU twice.
ACCESS GUIDE PROG SET
SCREEN
3
Press PUSH JOG
%
fi to move the highlight bar
(pointer) to "GUIDE PROG SET", then press OK.
The Guide Prog. Set screen appears.
Channel position Station name
1 ARD
2 ZDF
3 WDR
Guide Program Number Set
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
CLOCK SET
JLIP ID NO. SET
R.A. EDIT
[5
∞
] =
[MENU] : EXIT
5
GUIDE PROG SET
GUIDE PROG TV PROG
11
: AUTO SET BY SHOWVIEW
[ ]: MANUAL SET
[
5
∞] : ?
[MENU] : EXIT
* For Customers in Australia and New Zealand:
With this recorder, the G-Code system is identified as
"SHOWVIEW".
12
45
3
6
8
0
7
9
2
4
1
3
NUMBER
OK
CANCEL
PUSH JOG
MENU