Filter
Top Products
EN 31
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
● If you are using the Illumi-Guide feature, the following
buttons remain lit: START +/–, STOP +/–, DATE +/–,
TV PROG +/– and MENU.
ENTER CHANNEL POSITION
6
Press TV PROG +/–.
IMPORTANT
Be sure to confirm the setting of PDC/VPS recording.
●If " ON" is displayed on the screen or " " is lit
on the display panel, PDC/VPS is set to ON.
●If " OFF" is displayed on the screen or " " is
not lit on the display panel, PDC/VPS is set to OFF.
To change the setting, press : PDC/VPS
(NUMBER key "7").
੬ "PDC/VPS Recording" on page 33.
● If you are using the Illumi-Guide feature, OK blinks
when the following buttons are lit: START +/–, STOP
+/–, DATE +/–, TV PROG +/– and MENU.
SET TAPE SPEED
7
Press SP/LP ( ) to set the tape speed.
RETURN TO NORMAL SCREEN
8
After confirming all information is correct, press OK
and the normal screen appears.
● Repeat steps 1–8 for each additional programme.
ENGAGE RECORDER’S TIMER
MODE
9
Press TIMER. The recorder turns off automatically.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER
key “9”) for weekly serials or DAILY (NUMBER key “8”) for
daily serials (Monday–Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
8
••
•
•
••
••
•
•
•
••
•
•
••
••
•
•
•
12
45
3
6
8
0
7
9
2
4
1
3
DAILY
OK
WEEKLY
TIMER
:PDC/VPS
– P1 –
START STOP
21:00 = 22:00
SP
ON
DATE TV PROG
25.12 1
ARD 1
[+/–] =
[MENU] : EXIT
SP
SP/LP
DATE+/–
NOTE:
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL" appears
on the front display panel. To record the extra programme, you
must first cancel any unnecessary programmes (
੬
pg. 32).
Satellite Tuner Users
To timer-record a satellite broadcast using Regular Timer
Programming:
● Before you start step 1, be sure to set the recorder's input
mode to "AUX2" (੬ pg. 35). Do NOT change the input
mode until the selected programme has been timer-
recorded. In step 6, you have to select "AUX2" as well.
● Before the selected programme begins, select the
appropriate channel on the satellite tuner, and then set
the tuner's timer. If your satellite tuner does not have a
timer, leave the unit's power on.
TIMER
TV PROG+/–