Filter
Top Products
26 EN
RECORDING (cont.)
ADJUST AUDIO RECORDING
LEVEL
1
Turn Hi-Fi REC LEVEL in either direction.
● When the level indicator lights up to or near 0dB
with the loudest signal being applied, the recording
level is optimum.
NOTES:
●
Make sure that the "HI-FI L+R" position is selected with the
AUDIO MONITOR button.
੬
p. 18
●
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
Hi-Fi Audio Recording LEVEL
Control
In most cases, setting the Hi-Fi audio recording level control to
the center position will provide satisfactory results. If necessary,
you can adjust the Hi-Fi audio recording level more precisely
by reffering to the audio level indicator on the front panel.
Retake
You can cut out unnecessary parts of a TV programme while you're recording it.
End of programme
Programme
Beginning of programme
Programme
Recorded part
RESUME RECORDING
3
Press PLAY when you wish to resume recording.
ENGAGE RECORD-PAUSE
MODE
1
Press PAUSE during recording.
LOCATE START POINT
2
Turn the JOG dial (or hold down REW or FF) and
release it when you reach the point where you want
to resume recording.
* Your recorder returns to the Record-Pause mode.
Go back to end of programme to cut out
unnecessary part
Unnecessary
part
Unnecessary
part
8
••
•
•
••
••
•
•
•
••
•
•
••
••
•
•
•
Hi-Fi REC LEVEL
FF
REW
PAUSE
PLAY
JOG