JVC HR-S9400E VCR User Manual


 
16 EN
Manual Tracking
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG buttons.
OVERRIDE AUTOMATIC
TRACKING
1
Press SP/LP ( ) on the remote to engage manual
tracking.
ADJUST TRACKING
MANUALLY
2
Press TV PROG + or to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press SP/LP ( ) on the remote to re-engage auto-
matic tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
PLAYBACK (cont.)
8
••
••
••
••
••
••
12
45
3
6
8
0
7
9
2
4
1
3
REW
FF
REVIEW
PUSH JOG
REW
FF
PAL/MESECAM
TV PROG
Colour System Selection
You can also record SECAM signals, or play back a MESECAM
tape on this recorder.
* MESECAM is the designation for tapes with SECAM signals
that have been recorded on a MESECAM-compatible PAL
video recorder.
To record SECAM signals or play back a MESECAM tape, set
the PAL/MESECAM switch to "MESECAM".
To record PAL signals or play back a PAL tape, set the PAL/
MESECAM switch to "PAL".
3R Picture
Your video recorder is equipped with the 3R Picture System.
During playback, 3R(= Resolution and Response Recovery
technology) maximises sense of resolution and sharpens image
edges to make playback picture look better focused.