Filter
Top Products
Auto Set Up – referring to the display panel
The Auto Set Up function sets the tuner channels, clock and Guide Program numbers
automatically.
BEFORE YOU START PLEASE MAKE SURE THAT:
Ⅲ The TV aerial cable is connected to the ANT.IN jack on the rear panel of the video recorder.
Ⅲ The video recorder's mains power cord is connected to a mains outlet.
Ⅲ The video recorder is turned off.
Ⅲ Load batteries into the remote control.
1
Press (recorder/remote).
2
Press PUSH JOG %fi (remote) to select the international
telephone country code.
● If you have selected a country code other than 32
(BELGIUM) or 41 (SUISSE), go to step 3.
● If you have selected 32 (BELGIUM) or 41 (SUISSE),
press OK (remote) and select the language code by
pressing PUSH JOG %fi (remote), then go to step 3.
Language Code
(Ex.) FRANCAIS is selected for BELGIUM
International Telephone
Country Code
3
Press OK (remote). Do NOT press any button on the video recorder or remote control until the current
time appears.
*
Once you have performed Auto Set Up, even if the recorder's memory backup has expired, the
recorder will not perform Auto Set Up again.
During Auto Set Up
Auto Set Up completed
●If "CH1" or "– –:– –"
appears on the display
panel, see page 7 of
the instructions.
FOR MORE INFORMATION SEE INSTRUCTIONS/P6
EN
(Ex.) DEUTSCHLAND is selected.
International Telephone Country Code
SUOMI : 358 SUISSE :41
PORTUGAL : 351 ITALIA : 39
DEUTSCHLAND : 49 ESPAÑA : 34
NORGE : 47 BELGIUM : 32
SVERIGE : 46 NEDERLAND : 31
DANMARK : 45 GREECE :30
ÖSTERREICH : 43 OTHERS :- -
* Depending on the model, the selectable codes
may be limited.
Language Code for the HR-S9400E
ENGLISH : 01 ITALIANO : 04
DEUTSCH : 02 NEDERLANDS : 05
FRANCAIS : 03
Language Code for the HR-S9400EH
ENGLISH : 01 CASTELLANO : 04
DEUTSCH : 02 NEDERLANDS : 05
FRANCAIS : 03
HR-S9400E/EH
COPYRIGHT © 1997 VICTOR COMPANY OF JAPAN, LTD.
E/EH
Printed in Japan
0697HOV
*
UN
*
VP
VICTOR COMPANY OF JAPAN, LIMITED