Filter
Top Products
Channel selection
19
Reception status - analogue
You can, of course, select other channels by pressing the ou buttons while
receiving an analogue channel. The selection of analogue channels is indicated by
the information bar being displayed briefly in white, e.g.:
TV 59 DER KINDERKA STEREO
By pressing the O button, you can see
the selected channel in the same form.
Press the i button to see the channel
list indicated in white in the display. It
shows the memory location, the channel
name and the reception type "A" or "D"
(analogue or digital). By pressing the
ou buttons and the -+ buttons
you can jump to the next page in the same
way as with the digital channels.
Press the O button to select the required channel and press the L button to
exit the channel list and remain in the channel already selected.
If you have now selected a digital channel, as a confirmation, the coloured display
for this type of transmission will appear.
Selecting a TV channel by number entry
You can select a different TV channel during a current TV channel by entering the
channel location number. Use the number buttons 1 to 0 for the purpose of
entering the channel location number.
Example You wish to select the TV channel "DSF". This channel is stored under the channel
location number 015. (The order of TV channels is defined in the channel memory
and therefore only serves as an example here.)
To select this channel, press the numbers 1 and 5 one after the other. The
receiver waits for about 3 seconds for entry of the next number.
Follow the same procedure for all other channels – i.e. also channels with three-
digit channel location numbers. You do not have to enter leading zeros.
Switching over to radio channel
You can switch over from a TV channel to a radio channel.
Press the R button on the remote control for this purpose.
The receiver switches over to the channel location of the radio channels last set.
You can return to the TV channel by pressing the same button or T. The
corresponding display relating to the received channel, i.e. as when selecting the
TV channels, appears on the screen. The LCD display shows a small "r" together
with the channel location number.
The screen will be blanked out after several seconds.